Skip to main content

How To Change NetBIOS Name of A Computer

So yes... After 4 months without new contents, so I started with this. It looks easier to do (well, it is), but before you do that, you may want to read this to understand the difference between hostname and netBIOS, then starts to explore on when to use them, their limitations etc etc. I won't discuss here (or maybe not today). So let's back to the topic.
 Description :
Changing NetBIOS Name of A Computer.
ComputerName :


NetBIOS :


How To Do :

  1.  Go to Start > Run, and type REGEDIT
  2.  Browse to Computer > HKEY_LOCAL_MACHINE > SYSTEM > CurrentControlSet > Control > ComputerName > ComputerName

  3. At the right side, double click at ComputerName string, and put correct Value data. Press OK.
  4.  Then you will get this
  5. Reboot your computer / VM.
  6. Once it is up, double check your netBIOS name. New name shall be reflected
Reference :
  • http://itknowledgeexchange.techtarget.com/itanswers/difference-between-netbios-and-host-name/

    Labels:

    Comments

    1. Simon1 October 2016 at 02:36

      Thanks for this - just saved me a load of trouble.

      ReplyDelete
    2. UplayOnline1 August 2017 at 23:30

      This comment has been removed by a blog administrator.

      ReplyDelete

    Post a Comment

    Popular posts from this blog

    Session Settings Not Listed in Citrix Web Interface web site.

    In previous post , I mentioned on what need to be done by users in case the publsihed applications did not successfully launched in seamless mode. However, in some cases, users might not be able to see the option. This post will help to solve it. Issues : Session Settings preference is not listed in Citrix Web Interface web site. This is due to the option is not enabled. It can be checked at Citrix Web Interface Management Console. Troubleshooting   Launch Citrix Web Interface Management Console . Browse to Citrix Web Interface > XenApp Web Sites . You will see lists of created Sites.  Right click at the required farm URL.  Choose S e ssion Preference  This window will appeared. Browse to Remote Connnection > Display . You will see the option " Allow users to customize window size " is unchecked . Resolution : Check the option " Allow users to customize window size ", and press OK  Get users to refresh the Web
    2 comments
    Read more

    Microsoft Assessment and Planning (MAP) Toolkit - Extract Report (3/4)

    As mentioned in  the first post , this KB series is about Microsoft Assessment and Planning (MAP) Toolkit. There are 4 main steps : Install MAP Toolkit and its basic configuration Collect inventory Data  Extract Report Extract Advanced Report Once inventory data collected, we can generate reports. From the inventory data collected earlier, we can use options in the toolkit to generate the report. For this example, we re going to discover Windows 10 Readiness This KB is about  how to generate report from collected inventory data. At Overview page, select the targeted scenario category. In this example, it is Desktop . At this page, select specific scenario that we after. In this example, it is Windows 10 Readiness.     It is possible to customize assessment properties. The properties will set the threshold of the assessment, such as, threshold for minimum CPU speed, acceptable free disk, as well as minimum assigned RAM. To do so, select Customize assessment pr
    Post a Comment
    Read more